Configuring the Actiontec ADSL modem with Static IPs.
	Use this configuration if you are using an advanced configuration of it you have more than 1 static IP. Once you have connected the Actiontec modem to your computer as shown in the diagrams provided with the modem, open a browser window and browse to 192.168.0.1.
	On the main menu screen, select Setup / Configuration.
	Click on Advanced Setup on the left side of the screen.
	Click on the Begin Advanced Setup button.
	On the left side of the screen, select WAN IP Address.
	Select Obtain an IP Address through PPPoA. Check the box for Unnumbered Mode. Enter your Gateway Address and Subnet Mask in the respective fields. Click Next.
	Click Next on the Wireless Settings screen. Enter your username and password provided for your DSL account. Enter the Static IP address that was used for the Gateway Address on the WAN IP Address screen. Click Next.
	Click DHCP Server in the left column. Select OFF for DHCP service if you do not need the Actiontec to assign IP addresses to your network, then click NEXT
	Click NAT in the left column. Select OFF for the NAT service if you do not need your Actiontec to function as a firewall for your network, then click NEXT.
	Click Save and Restart in the lower left corner of the screen. You can now reconfigure your computer or network for use with your static ip range.
	opus:interactive | 2303 NW 23rd Ave Portland, Oregon | 503-972-6690