Configuring the Actiontec ADSL modem with Static IPs.
	Use this configuration if you have more than 1 static IP. Once you have connected the Actiontec modem to your computer as shown in the diagrams provided with the modem, open a browser window and browse to 192.168.0.1. If your Actiontec modem screens look slightly different, check here for the older version.
	On the main menu screen, select Setup / Configuration.
	Click on Advanced Setup on the left side of the screen.
	Click on the Begin Advanced Setup button. On the left side of the screen, select WAN IP Address. Select Obtain an IP Address through PPPoA. Click Next.
	Enter your username and password provided for your DSL account. Enter the Gateway Addressin the Static IP field. Click Next.
	Enter your Gateway Address in the first field for Device IP Address Enter your Subnet Mask in the second field for Device LAN Netmask Click Next.
	Click DHCP Server in the left column. Select OFF for DHCP service if you do not need the Actiontec to assign IP addresses to your network, then click NEXT
	Click Save and Restart in the lower left corner of the screen. You can now reconfigure your computer or network for use with your static ip range.
	If your Actiontec modem screens look slightly different, check here for the older version.
	opus:interactive | 2303 NW 23rd Ave Portland, Oregon | 503-972-6690